Toshiba Strata DK 16 - Page 290

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-40-
TABLE RM-AJ
PROGRAM 70
VERIFY ACCOUNT CODE/TOLL RESTRICTION ASSIGNMENT
ACTIONSTEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 70
P70
Enter Program Number 70
3 P70 002 YZ
Press CR.
Refer to the System Record Sheet, and enter the required code
number (000 ~ 299).
Example: code number 002; Enter: 0 0 2.
The system will display the present digit Restrict (Y) and Toll
Restriction Status (Z) for entered code number.
4 Refer to the System Record Sheet, and enter the required
digit Restrict and Toll Restriction data.
Example: digit Restrict (1) and Toll Restriction (3);
Enter: 1 3.
5 To Exit Program/Store Data
A) To store data, press CR.
B) Continue returning to step 3 until all Program 70 data
is entered.
C) To exit this program, press # # CR.
P70 002 YZ 13
P70 002 YZ 13
P70 ##
P
NOTE:
Pro
g
rams 77-1 and 77-2, use T
y
pe 1 procedure.