Toshiba Strata DK 16 - Page 293

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-43-
TABLE RM-AM
PROGRAM 93
CO LINE IDENTIFICATION
ACTIONSTEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 93
P93
Enter Action Code 13 P93 1 02
Refer to the System Record Sheet and enter the appropriate
CO line number.
Example: CO line 2, enter 0 2.
The system will display previously entered identification
characters (up to 16 characters).
5 To Exit Program/Store Data
A)
B)
C)
To store data, press CR.
Continue returning to step 3 until all data has been entered
for this program.
To exit this program, press # # CR.
4 Refer to the System Record Sheet and change identification
if required:
Example: OVERSEAS.
Enter Program Number 93
Press CR.
(up to 16)
P93 1 02
OVERSEAS
(up to 16)
P93 1 02
OVERSEAS
P93 ##
P
(up to 16)
NOTE:
Use
SPACE to clear characters.
Current I.D.
.......... (16 characters maximum).