Toshiba Strata DK 16 - Page 292

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-42-
TABLE RM-AL
PROGRAM 80
DIGITAL AND ELECTRONIC TELEPHONE RINGING TONES
ACTIONSTEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode.
At the >MODE prompt, enter P R O G CR.
2 P 80
P80
Enter Program Number 80
3 P80 01
Press CR.
6 To Exit Program/Store Data
A)
B)
C)
To store data, press CR.
Continue returning to step 3 until all data has been entered
for this program.
To exit this program, press # # CR.
Refer to the System Record Sheet and enter the required
port number.
Example: Port 01, enter 0 1.
4 P80 01# 1Press # key.
The system will display 1 or 2 corresponding to tone 1 or tone 2.
P80 01# 1 2
P80 ##
P
P80 01# 1 2Refer to the System Record Sheet and change if required.
Example: Tone 2, enter 2.
5
NOTE:
Pro
g
rams 81 ~ 89 use T
y
pe 2 procedure.