REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-47-
PROGRAM 46-6 ~ 8
TOLL RESTRICTION ALLOWED/DENIED OFFICE CODES ASSIGNED BY CLASS
ACTIONSTEP DISPLAY/PRINTOUT
1
>MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 46
P46
Enter Program Number 46
6
Press CR.
Refer to the System Record Sheet and enter the office code or
office code group. Single . Group
*
.
Press SPACE to enter more codes.
P46 X Y
ALLOW –
or DENY
7
Press SPACE to temporarily store data. Press SPACE when
completed.
P46
8
Continue returning to step 3 until all data input is completed for
this program.
To Exit this Program
Press # # CR.
P46 ##
P
3 Enter class number (1 ~ 4). P46
Class Number (X)
4 Enter 6, 7, or 8 SPACE. P46
• 6
• 7
• 8 SPACE
— to add codes to memory (allowed).
— to delete codes from memory (deny).
— to display codes in memory (allowed codes).
6, 7, or 8 (Y)
5
To Next Page
Loading...
