Toshiba Strata DK 16 - Page 311

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-61-
TABLE RM-BM
SPEED DIALING DATA DUMP
ACTIONSTEP DISPLAY/PRINTOUT
1 >MODE DUMP
D
Enter the Data Dump Mode
At the >MODE prompt, enter D U M P CR.
2 To Output Speed Dialing Data
3 To Stop Printout at Any Time D
Enter R E P CR
= A L L or S Y S
= Port number for individual station speed dial.
---or--- R E P CR
Enter DELETE CR at the same time.
4 To Exit the Dump Mode
Enter Q U I T CR.
TABLE RM-BN
LCD MESSAGING DATA DUMP
ACTIONSTEP DISPLAY/PRINTOUT
1 >MODE DUMPEnter the Data Dump Mode
At the >MODE prompt, enter D U M P CR.
2 To Output Message Data
3 To Stop Printout at Any Time D
Enter M S G CR
= A L L or S Y S
= Port number of individual station.
---or--- M S G CR
Enter DELETE CR at the same time.
D MSG
4 To Exit the Dump Mode >MODE
Enter Q U I T CR.