Setting System Parameters
Speed Dial—Advanced Features
Strata DK System Administrator Guide 5/00 25
Important!
● Do not lift the handset.
● If you do not enter the entire sequence within a specified time (set in system
programming for either one or three minutes), the operation times out and
your telephone returns to idle mode.
● If your telephone does not have a Speed Dial, press “*” instead of Speed Dial
and enter 44 instead of # in all feature sequences.
● [PDNs] can be stored in speed dial sequences but [PhDNs] and [SDNs]
cannot.
To Next Page
Loading...
