Installation
MAS Recovery
Strata CIX Media Application Server Installation 07/06 15
4. Follow the prompts or instructions to activate the license.
5. When the registration completed, proceed to the next section.
Note At this point the MAS is in the “as shipped” condition. Data file, configuration files and
license files must be restored.
Step 1D: Setup Network Connections
The recovery software will automatically populate the information listed in this step. This information
can be retained or customer specific information can be entered.
1. Log on to the MAS; click on Valued Customer and enter password as the password.
2. From the main menu select Start > Control Panel > Network and Internet Connection then
click on Network Connection.
3. Right click on the Local Area Connection for the Intel® PRO/1000 CT Network, and select
Properties.
4. Highlight Internet Protocol (TCP/IP) and click the Properties button.
5. Select Use the following IP address and enter the following:
a. IP Address: 192.168.254.252 (static address)
b. Subnet Mask: 255.255.255.0
c. Default Gateway: Blank
6. Click on OK.
END OF RECOVERY PROCEDURE
Post Recovery Procedure
The MAS is now in its as shipped condition. Go to “MAS Licensing” on page 10.
To setup the SES and ACD refer to their manuals.
To Next Page
Loading...
