Installation
MAS Modem Installation (Optional)
16 Strata CIX Media Application Server Installation 07/06
MAS Software Backup
The files on the MAS should be backed up on a regular basis. The backup files can be stored on a
network disk drive or another network device.
A Backup and Restore Utility is available for managing customer database information for all of the
applications on the MAS. This utility is available for download, at no charge, on the Toshiba FYI
website. Product Bulletin PBCIX-0031 describing this utility and how to use it is also available on
the FYI website.
MAS Modem Installation (Optional)
The MAS can be accessed from a remote location via the network by using the Windows® XP
Remote Desktop feature. The MAS can also be accessed via a dial-up connection after the
installation of the Zoom 3090 USB V.92 Modem (Toshiba part number SYS-USB-MODEM).
The Zoom™/Modem V.92 USB Mini is a compact external modem
for Windows computers.
Zoom is a registered trademark of Zoom Telephonics, Inc.
Important!
Do not connect the modem to the USB until after the modem driver software
has been installed on the MAS.
Step 1: Install Modem Driver Software on MAS
Install the USB modem driver software before connecting the modem to the USB port on the MAS.
1. Insert the Zoom driver software CD-
ROM into the MAS CD-ROM drive.
The CD-ROM auto-runs (shown at
right).
2. Select Install Modem Drivers.
3. Select USB Drivers.
4. Say no to all of the other software
components when prompted.
5. Reboot when prompted.
Physical Size
2.75 in. x 5.0 in. x 0.87 in.
(7.0 cm x 12.7 cm x 2.21 cm)
Power
USB port powered
no batteries or AC adapters are required
Interface
Cables
Modem to MAS: USB cable (included)
Modem to phone circuit: RJ-11 (NOT included)
Regulatory
Approvals
FCC Parts 15B and 68
UL, C-UL, CE
To Next Page
Loading...
