T4900CT
5. Remove one M2.5x4 screw securing the HDD pack frame to the computer.
(figure 4-8).
6. Disconnect the HDD Flexible Printed Circuit (FPC) from the computer.
7. Insert a fingernail or similar object under the notch on the HDD pack, lift it, and
pull up to remove the HDD pack (figure 4-8).
Figure 4-8 Removing the HDD pack
8. Remove the VOID seal, and remove four M3x4 flat-head screws securing the case
to the HDD pack. Open the case and lift out the HDD pack (figure 4-9).
Figure 4-9 Removing the cover
To Next Page
Loading...
