Toshiba TOSDIC-CIE DS Operation Manual

2. System component
22
Table 2.15 SAO012 specification
Item Specification
Model name SAO012
Number of output points 8 points
Output insulation unit 8-point common insulation (output (-) side common)
Output signal level 4-20mADC
Load resistance range
0 to 750
Ω
Slew rate 10ms(0 to 63%)
D/A conversion data +800 to +4000 counts
CMRR 100dB or more (AC100V-50/60Hz)
Reference output precision
Within
±
0.125%/full scale
Load fluctuation
Within
±
0.05% (250
Ω
reference)
Temperature drift
Within
±
0.01%/
°
C
Power supply voltage drift
Within
±
0.1%/full scale (
±
10% of system power fluctuation)
Output ripple
Within
±
0.5%/full scale
Error output specification Retention mode (output retention)/reset mode (output off) can be
selected
Address setting Set 1 to E(1 to 14) with the front address setting switch
Failure diagnosis Output current read-back (Note), transmission, CPU, memory
Insulation resistance
100M
Ω
or more (500VDC megger, between output common and
internal circuit)
Withstand voltage 500VAC/1 minute (between output common and internal circuit)
Current consumption 24VDC-300mA or less (system power supply)
Internally generated heat 7.2W or less (rated condition)
Applicable base card UIOU57
Outside dimension
40W
×
90H
×
95Dmm (excluding protrusions)
Weight 200g or less

Toshiba TOSDIC-CIE DS Specifications

General

Brand	Toshiba
Model	TOSDIC-CIE DS
Category	Control Systems
Language	English