Toshiba TOSVERT VF-AS3 Function Manual

E6582051
- 15 -
3.1.2. Mounting of option for VF-AS3
Refer to [Mounting/removing insert type options] of E6582062.
Warning
Mandatory
action
▼ The mounting/removing of option must be performed without supplying power(Turn off all
input power, wait at least 15 minutes, confirm that the charge lamp of inverter is no
longer lit). The inverter and option can become damaged.
3.1.2.1. Mounting of option
Insert option to the option slot A until you hear a click sound.
3.1.2.2. Removing of option
While pressing the release tab down, pull the cassette option to remove from the option slot.
Option slot A
Option slot A

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m