Unified Controller Vm series Controller typeS / typeL Virtualization Functional Manual
2. Safety Precautions in Wiring
Turn off the power when connecting
cables.
Otherwise, it may cause electric shock or
mechanical failure.
Use crimping terminal for wiring the
module, or cover the wire with tape.
Exposed conductive part may cause an
electric shock.
Install the terminal block cover
securely to the terminal block.
Exposed conducting parts may cause
electric shock.
Connect an external power supply
that matches the rating.
Otherwise, it may cause explosion or
fire.
Wiring work must be done by
qualified experts.
Wrong wiring may cause fire, electric
shock or mechanical failure.
Install a fuse that matches the
current capacity to the external
circuit for overload protection of the
relay output module.
Otherwise, a load short-circuit may
cause an accident or damage to the
machine.
Construct the emergency stop circuit
and interlock circuit outside the Vm
series.
Otherwise, failure or malfunction of Vm
series may cause injury or damage to
the equipment.