Totaline Basic 1H/1C & 2H/1C
Early Recovery allows the thermostat to "learn" how long your furnace or air conditioner takes to
reach the set temperature. Simply program the desired times and desired temperatures into the
schedule. The thermostat will determine when to activate heating or cooling so that the desired
temperature is attained at the desired time.
Example: If you set the Period 1 to 6 a.m. and the temperature to 70 °F (21 °C), the heat will come
on before the set time, so the temperature is 70 °F (21 °C) by the time you wake at 6 a.m.
i:]'rlliOl_[,.[,]iil_ '1_
Your thermostat has a feature that helps prevent damage to the compressor of your air
conditioning or heat pump system. Because damage can occur if the compressor is restarted too
soon after shutdown, this feature forces the compressor to wait 5 minutes before restarting. During
the wait time, the message Cool @ or Heat # flashes on the screen. When the safe wait time has
elapsed, the message stops flashing and the compressor turns on.
13
To Next Page
Loading...
