Toto SN970M - Gap between the Top Unit and the Toilet Lid; Deodorizing Filter

30
31
Maintenance
Maintenance
Gap between the Top Unit and the Toilet Lid
Between the top unit and the toilet lid (Perform monthly)
The toilet lid can be removed for thorough
cleaning.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
Disconnect the power plug
before removing the toilet lid.
Removing and Reinstalling
A
B
C
D
E
Pin
Hinge
Recess
Hinge
Hold with
both hands
: Pull the left side outward.
: Disconnect the hinge from the tab and
pull up.
: Disconnect the right side.
2
Wipe with a soft cloth that has
been soaked in water and
wrung out thoroughly.
3
Reinstall the toilet lid.
: Join the pin and the hinge on the right
side.
Slightly tilt the toilet lid to the front.
: While pulling out the left side,
: Mount by joining the hinge with the tab.
* Be careful not to pinch your fingers.
4
Insert the power plug.
Deodorizing lter
Deodorizing Filter (Perform monthly)
<If you notice odors>
1
Disconnect the power plug and
remove the deodorizing lter.
Hold the knob and pull outward.
•
Do not pull with undue force. (May cause
•
damage or malfunctions.)
Deodorizing filter
Knob
2
Clean with a tool such as a
toothbrush.
When washing with water, dry off all water
•
before mounting.
3
Install the deodorizing lter and
insert the power plug.
Push firmly until a click sound is heard.
•
Knob
Deodorizing filter
Toilet lid
Top unit