EasyManua.ls Logo

Toto SN970M - Wand; Water Filter Drain Valve

Toto SN970M
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
33
Maintenance
Maintenance
Wand
Wand (Perform monthly)
<If you notice dirt>
Soft cloth soaked in water Toilet paper, etc.
(May cause damage)
1
Extend the wand.
Remove the remote control from the hanger,
1.
and press [MENU] on the backside.
(Page 14)
Use
2.
to select "CLEANING" and then press
[ENTER].
Use
3.
to select "WAND CLEANING MODE
ON/OFF" and then press [ENTER].
The wand extends and water sprays out for
cleaning
The wand automatically retracts after about
5 minutes.
2
Wipe with a soft, wet cloth.
Do not pull, push or press the wand with
excessive force.
(May cause damage or malfunctions.)
3
Return the wand.
In the [WAND CLEANING MODE ON/OFF]
1.
screen, press [ENTER] again.
The wand retracts.
Wand
Water filter drain valve
Water Filter Drain Valve (Perform once every 6 months)
<If you think the water pressure has weakened>
CAUTION
Do not remove the water filter
drain valve while the water
supply valve is open.
(Otherwise, water may spray out.)
1
Close the water supply valve.
(Page 54)
The water supply stops.
2
Release the pressure from
the water supply pipe.
Remove the remote control from the
1.
hanger, and press [MENU] on the
backside.
(Page 14)
Use
2.
to select "CLEANING" and
then press [ENTER].
Use
3.
to select "WAND CLEANING
MODE ON/OFF" and then press
[ENTER].
The wand extends and water
comes out.
In the [WAND CLEANING MODE ON/
4.
OFF] screen, press [ENTER] again.
The wand retracts.
3
Remove the cover and
disconnect the power plug.
Cover
4
Remove the water lter drain
valve.
Loosen the water filter drain valve with
a flat-head screwdriver, and then pull
on it.
Dustcloth, etc.
Flat-head screwdriver
Water filter drain valve
Water filter drain valve
Top unit (left side)
(Water drain plug)
5
Clean with a tool such as a
toothbrush.
Also, remove any dust from inside the
hole of the drain valve.
6
Mount the water lter drain
valve.
Insert the drain valve and use a flat-
head screwdriver to tighten it securely.
7
Mount the cover and insert
the power plug.
Cover
8
Open the water supply valve.
(Page 15)
Water Filter Drain Valve

Related product manuals