Touchstone SRV 2800 Pro - Assembling the Flat Panel TV Mount

2800/3900 SRV PRO 360-Degree Swivel TV Lift
www.touchstonehomeproducts.com 800.215.1990
rev. 20201214
20
Assembling The Flat Panel TV Mount
Tools Required:
- Phillips head screwdriver
Parts Required:
- 2 horizontal flat panel TV mounting brackets
- 2 vertical rods
- 4 mounting screws and washers
Instructions:
1. Attach the 2 vertical flat panel bracket rods to the top horizontal flat panel bracket. The elongated holes in the
horizontal bracket should be facing down.
2. Once the vertical flat panel bracket rods are attached to the top horizontal flat panel bracket, attach the lower
horizontal flat panel bracket to the vertical flat panel bracket rods. The elongated holes in the horizontal bracket
will face down.