115
2
2-2. Charging
Plug-in hybrid system
The plug-cord can be replaced
using the following procedure.
Plug temperature
detection mal-
function
Flashes Flashes
There is a malfunction in the
plug temperature detection
part.
Consult any authorized
Toyota retailer or Toyota
authorized repairer, or any
reliable repairer
Plug temperature
increase detection
Flashes Not illuminated
An increase in the temperature
of the plug is detected due to
an improper connection
between the socket and plug.
Check that the plug is
securely connected to the
socket
AC charging cable
life span notice
Illuminated Flashes
The number of charges using
the AC charging cable is near-
ing the end of its usable life
span.
Consult any authorized
Toyota retailer or Toyota
authorized repairer, or any
reliable repairer
AC charging cable
life span
Illuminated Illuminated
The number of charges using
the AC charging cable has
exceeded its usable number of
charges.
Consult any authorized
Toyota retailer or Toyota
authorized repairer, or any
reliable repairer
Status
Power indica-
tor
Error warning
indicator
Cause/Correction procedure
Replacing the plug-cord
(Mode 2 AC charging cable)
(if equipped)
To Next Page
Loading...
