51
Chapter 8
QoS (Quality of Service)
1 ) Set a high priority rule for the ftp server.
a . Click Add in the High Priority section.
b . Select By Application and then select ftp in the list. Scroll
down and click OK.
Tips:
If your application isn’t listed on the screen, scroll down and click Custom Application
to add application manually.
• Name: Enter a name for your applicaiton.
• Protocol: Select the protocol for your application, if your are not sure, select
ALL.
• Port: Enter the destination port for your application, usually each application
has a fixed port, please ensure you enter the correct the port. In this case, the
destination port for ftp is 21.
2 ) Set a middle priority rule for the phone.
a . Click Add in the Middle Priority section.
To Next Page
Loading...
