85
Chapter 13
5. Disable DHCP:
1 ) Go to Network > DHCP Server.
2 ) Deselect Enable DHCP Server and click Save.
Now you can go to Advanced > Status > Wireless to check the WDS status. When the
WDS status is Run, it means WDS bridging is successfully built.
13. 13. 3. Duplex Setting
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > System Tools > System Parameters. Focus on Duplex section.
3. Select the duplex type from the drop-down list and click Save.
13. 14. Log Out
Click Logout at the top right corner , and you will log out of the web page and be directed
to the login window.
To Next Page
Loading...
