TP-Link Archer C7 AC1750 - 4.7 Wireless 5 GHz Settings

Archer C7
AC1750 Wireless Dual Band Gigabit Router
 Current Status - The connected wireless station's running status, one of STA-AUTH/
STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/
Disconnected
 Received Packets - Packets received by the station
 Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.
4.7 Wireless 5GHz
Figure 4-30 Wireless menu
There are six submenus under the Wireless menu (shown in Figure 4-15): Wireless Settings,
WPS, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless
Statistics. Click any of them, and you will be able to configure the corresponding functions.
4.7.1 Wireless Settings
Choose menu “Wireless 5GHz
→
Wireless Settings”, you can configure the basic settings for
the wireless network of 5GHz on this page.
- 46 -