3. Select the Bind checkbox.
4. Click the Save button to save it.
Figure 4-99
To modify or delete an existing entry, follow the steps below.
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Modify column.
To find an existing entry, follow the steps below.
1. Click the Find button as shown in Figure 4-99.
2. Enter the MAC Address or IP Address.
3. Click the Find button on the page.
Figure 4-100 Find IP & MAC Binding Entry
4.18.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries (shown in Figure 4-101).
- 98 -
To Next Page
Loading...
