TP-Link Archer C7 AC1750 - 4.8 Guest Network

Archer C7
AC1750 Wireless Dual Band Gigabit Router
 Current Status - The connected wireless station's running status, one of STA-AUTH/
STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/
Disconnected
 Received Packets - Packets received by the station
 Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.
4.8 Guest Network
Figure 4-45 The Guest Network menu
There are one submenus under the Guest Network menu (shown in Figure 4-45): Wireless
Settings.
4.8.1 Wireless Settings
Choose menu “Guest Network
→
Wireless Settings”, you can configure the Guest Network
Wireless Settings on the page as shown in Figure 4-46.
- 58 -