16
The application allows to preview and
efficiently configure the most important
parameters of the regulator. In this regard, it
primarily provides:
• preview basic operating parameters
• possibility to modify values of selected
parameters
• view and edit time schedules
• reading the alarm list.
The ecoNET.apk for Android application is
available for free download directly under the
link:
The ecoNET.app for iOS application is
available for free download directly under the
link:
12. Restoring default user name and
password
Default username and password (user:
admin, password: admin) can be restored
with the use of WPS/RESET button located
near indicators on the ecoNET300 housing.
The ecoNET300 module has to be connected
to power supply:
1. Push WPS/RESET button during normal
module operation.
2. Hold this button pressed for at least 10
seconds.
3. Release the WPS/RESET button.
4. A LED indicator near the button should
flash several times.
5. Wait for app. 2 minutes.
6. The module will automatically start up
and connect with the Internet.
In case the user has forgotten his password
for logging in the Internet module, it is
possible to restore default data with the use
of a button on the ecoNET300 housing.
To Next Page
Loading...
