11
Use the "TOUCH and PLAY" knob to select
letters and characters from the list, or touch
on the onscreen keyboard. Selected name is
confirmed with ENTER/OK.
In Network settings select Security.
Select and confirm encryption type in Wi-Fi
network (most often selected type is WPA2).
Go to Password tab. Enter Wi-Fi access
password using letters/characters available
on the listand confirm with ENTER/OK.
Filling data correctly results in ecoNET300
connected to a Wi-Fi network.
In MENU → Information → ecoNET WiFi,
user can readout an IP number, Mask, gate
and ecoNET24 connection condition
(required: Server: Connected). IP number
is used for opening a boiler controller website
from a level of LAN network.
8. Logging to the module from the local
LAN
The WWW server incorporated in ecoNET300
module enables remote management of
regulator on LAN local network without any
access to the Internet.
Enter: “http://module IP address” in the
address field of the internet browser.
Where can be read IP out from the regulator
menu:
MENU → Information → ecoNET Ethernet
or ecoNET WiFi.
Activated page will ask for user and
password.
Default settings are:
User: admin
Password: admin
After correct login, a WWW page for
managing the regulator operation will be
displayed.
9. Logging to ecoNET account
The ecoNET300 internet module cooperates
with external server which is available under
www.econet24.com This provides access
to the regulator via Internet.
In order to log into an account on an
external server, enter www.econet24.com
into an address field of the web browser.
Enter login and password in order to log
into ecoNET account.
To reminder the password for an existing
account, we choose FORGOT PASSWORD
and enter your email. A password reminder
will be sent to your email account.
9.1 First logging to ecoNET account
In case of first logging, user has to create a
new account in REGISTER tab.
To Next Page
Loading...
