TP-Link ecoNET300 - Connection With ecoMAX910920 Series; Connection With ecoSOL; Connection With ecoTRONIC Series

8
P3 version:
6.4 Connection with ecoMAX910/920
series
In case of ecoMAX910, 920 series, the
ecoLINK2 interface must be connected
directly to the regulator's RJ11 socket.
6.5 Connection with ecoSOL
In case of ecoSOL301, 400, 500 series, the
ecoLINK2 interface must be connected
directly to the regulator's RJ11 socket.
6.6 Connection with ecoTRONIC
series
In case of ecoTRONIC100, 200 series, a
El2adapter v2 must be used in order to
connect ecoLINK2 interface.