TP-Link JetStream TL-SG2210P User Manual

User Guide 524
Configuring Access Security Access Security Configurations
AES192-CBC: Disabled
AES256-CBC: Disabled
Blowfish-CBC: Disabled
Cast128-CBC: Enabled
3DES-CBC: Disabled
Data Integrity Algorithm:
HMAC-SHA1: Disabled
HMAC-MD5: Enabled
Key Type: SSH-2 RSA/DSA
Key File:
---- BEGIN SSH2 PUBLIC KEY ----
Comment: “dsa-key-20160711”
Switch(config)#end
Switch#copy running-config startup-config
2.2.5 Configuring the Telnet Function
Follow these steps enable the Telnet function:
Step 1 configure
Enter global configuration mode.
Step 2 telnet enable
Enable the telnet function. By default, it is enabled.
Step 3 telnet port port
Specify the port using for Telnet. It ranges from 1 to 65535.
Step 4 end
Return to privileged EXEC mode.
Step 4 copy running-config startup-config
Save the settings in the configuration file.
Downloaded from ManualsNet.com search engine

TP-Link JetStream TL-SG2210P Specifications

General

PoE Ports	8
PoE Budget	62 W
Switching Capacity	20 Gbps
MAC Address Table	8K
Packet Forwarding Rate	14.88 Mpps
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Ports	8× Gigabit PoE+ Ports
VLANs	4K
QoS	4 queues per port
Management	Web, CLI, SNMP
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% RH non-condensing