TP-Link JetStream TL-SG2210P User Manual

User Guide 641
Configuring IPv4 IMPB IP-MAC Binding Configuration
VLAN ID: 5
Switch(config-if)#show ip dhcp snooping interface gigabitEthernet 1/0/1
Interface max-entries LAG
--------- ----------- ---
Gi1/0/1 100 N/A
Switch(config-if)#end
Switch#copy running-config startup-config
2.2.3 Viewing Binding Entries
On privileged EXEC mode or any other configuration mode, you can use the following
command to view binding entries:
show ip source binding
View the information of binding entries, including the host name, IP address, MAC address, VLAN ID, port
number and protect type.
Downloaded from ManualsNet.com search engine

TP-Link JetStream TL-SG2210P Specifications

General

PoE Ports	8
PoE Budget	62 W
Switching Capacity	20 Gbps
MAC Address Table	8K
Packet Forwarding Rate	14.88 Mpps
Jumbo Frame	9KB
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Ports	8× Gigabit PoE+ Ports
VLANs	4K
QoS	4 queues per port
Management	Web, CLI, SNMP
Standards and Protocols	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at
Operating Humidity	10% to 90% RH non-condensing
Storage Humidity	5% to 90% RH non-condensing