TP-Link PHAROS SERIES Installation Guide

15
Specications
HARDWARE FEATURES
Models CPE210/CPE510 CPE220
Dimensions 224*79*60 mm 276*79*60 mm
Interface
LAN: 10/100 Mbps
Ethernet Port (PoE IN)
LAN0: 10/100 Mbps
Ethernet Port (PoE IN)
LAN1: 10/100 Mbps
Ethernet Port
GND: Grounding Terminal for Lightning Protection
RESET: Button to restore the device to Factory
Default
Power Supply
Passive PoE Adapter Included
CPE210: 24 VDC/0.25 A
CPE220/CPE510: 24 VDC/0.5 A
ESD Protection
1
15 kV
Lightning Protection
1
Up to 6 kV
Operating
Temperature
-40
℃
to 70
℃
(-40
℉
to 158
℉
)
Operating Humidity 10% to 90%
Certication CE, FCC, RoHS, IPX5
WIRELESS FEATURES
Models CPE210 CPE220 CPE510
Antenna Gain 9 dBi 12 dBi 13 dBi
Horizontal
Beamwidth/Elevation
Beamwidth
2
65°/40° 60°/30° 45°/45°
802.11 Standards 11b/g/n 11b/g/n 11a/n
Note:
1. Estimation is based on copper grounding cable and shielded CAT5e cable
with ground wire.
2. Beamwidth values may vary throughout operating frequency.

TP-Link PHAROS SERIES Specifications

General

Model	PHAROS SERIES
Category	Wireless Access Point
Frequency	5 GHz
Wireless Standards	IEEE 802.11a/n
Operating Temperature	70°C
Management	Web-based
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK, WEP
Interface	10/100M Ethernet
Operating Modes	Access Point, Client, Repeater
Mounting	Pole Mounting