Connect the Extender to the Internet
Basic Requirements
Place your extender in a well-ventilated place far from direct sunlight, any
heater or heating vent.
Leave at least 2 inches (5cm) space around the device for heat dissipation.
Turn off your extender and unplug the power adapter in a lighting storm to
avoid damage.
Use Web browser, such as Microsoft Internet Explorer 5.0 or above,
Netscape Navigator 6.0 or above.
Operating temperature of the extender should be 0℃~40℃ (32℉~104℉).
Operating humidity of the extender should be 10%~90%RH (Non-
condensing).
Quick Setup
Option ONE: Using Web Browser
Power On
Plug the extender’s adapter into an electrical outlet near your router, then
turn on the extender and wait until the Power LED
is lit and solid blue.
Connect to the Extender
● Via Wireless
1) Disconnect the Ethernet (wired) connection to your computer.
2) Click the Wi-Fi icon on the taskbar and connect to the extender's
network (e.g. TP-LINK_Extender_2.4GHz or _5GHz).
● Via Ethernet Cable
Disconnect the wireless connection to your computer.
To Next Page
Loading...
