TP-Link RE380D - Manage the Extender; Time Settings; LED Control

Manage the Extender
Manage the Extender
This chapter covers the following topics:
 Time Settings
 LED Control
 Firmware Upgrade
 Backup & Restore
 Factory Default Restore
 System Log
 Reboot
 Logout
Time Settings
The extender can obtain the current time from the Internet automatically. You
can set the time zone at the Time Settings page.
Launch a web browser and log into http://tplinkrepeater.net, then log in
to Settings > System Tools > Time Settings page.
Select your time zone, and click Save.
LED Control
LED Control can turn off the extender’s LEDs at the specific time. The extender
can still work normally while the LEDs are off.
Launch a web browser and log into http://tplinkrepeater.net, then go to
Settings > System Tools > LED Control page.
Tick the Night Mode to enable the LED Control function.
Set the time period to turn off the LEDs.
3