TP-Link RE380D - View the Information of the Extender; View the Extenders Current Status

View the Information of the Extender
View the Information
of the Extender
This chapter covers the following topics:
 View the Extender’s Current Status
 View the Information about the Host Network, the
Extender and the Clients
View the Extender’s Current
Status
Launch a web browser and log into http://tplinkrepeater.net, then go to
Settings > Status page.
You can view the network connection in the Status webpage.
● The normal status.
● The extender is failed to connect to your router.
● The extender is connected to your router normally, but no transmitting
data. Please check your host network.
● The extender is connected to the router unnormally. Maybe the gateway
is set incorrectly in the Static IP. You can select “Obtain an IP address
automatically” on the “Settigns > Network” page.
3