TP-Link RE380D - Appendix; Factory Default Settings; Troubleshooting

Appendix
Appendix
This chapter covers the following topics:
 Factory Default Settings
 Troubleshooting
 Specifications
 Glossary
Factory Default Settings
Name
Status
Username
admin
Password
admin
IP Address
192.168.0.254
Subnet Mask
255.255.255.0
Domain
http://tplinkrepeater.net
Network Name (SSID)
2.4GHz: TP-LINK_Extender_2.4GHz
5GHz: TP-LINK_Extender_5GHz
Wireless Security
Disabled
Access Control
Disabled
Troubleshooting
T1. How do I restore my extender to its factory default settings?
There are two ways to reset the extender:
● Option One: With the extender powered on, use a pin to press and hold
the Reset button until all LEDs turn on momentarily, then release the
3