Manage the Extended Network and Security Settings
Select the network you want to extend from the list.
Once a network is selected, the SSID and security settings of that network
will automatically be filled in. If the host network is encrypted, enter the
password. And then click save.
Relocate
Plug in the extender halfway between your wireless router (Host Network)
and the Wi-Fi dead zone.
Wait for the extender to reconnect and the LED turns solid blue. If
If the network you want to extend is on but not shown in
the list, please try the following methods:
Move the extender closer to your router. Then click
Refresh on the top-right corner of the list to scan the
network again.
You can also enter the information of the network
manually on the Connect to Network page. Then click
Save to connect to the host network.
When Host 2.4GHz/5GHz Security is WEP, please select
the index same with the host network.
To Next Page
Loading...
