TD-W8960NB 300Mbps Wireless N ADSL2+ Modem Router User Guide
)
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
4) How to enable DMZ Host: Log in to the Router, click the “Advanced Setup-NAT” menu on the
left of your browser, and click "DMZ Host" submenu. On the "DMZ" page, type your IP
address into the “DMZ Host IP Address” field, using 192.168.1.222 as an example, remember
to click the Save/Apply button.
93
To Next Page
Loading...
