TD-W8960NB 300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-51
)
Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).
To activate RIP for the device, configure an individual interface, select the desired RIP version and
operation, and select Enabled checkbox for the interface.
Click Save/Apply to save the configuration.
4.4.10 DNS
When you select the connection type PPPoE, PPPoA or IPoA for WAN configuration, you will see
the DNS menu in the Web-based Utility (shown in Figure 4-52). It includes DNS Server and
Dynamic DNS submenus.
Figure 4-52
50
To Next Page
Loading...
