TD-W8960NB 300Mbps Wireless N ADSL2+ Modem Router User Guide
• Enabled (Scan): Select this option to enables wireless bridge restriction, and it will scan
the environment for APs that exist around the device. Only those selected AP will be
granted access.
• Refresh: Click this button to scan and display the APs.
Figure 4-90
)
Note:
Only Open or Shared authentication method support wireless bridge, you should choose
“Wireless”Æ“Security” to change authentication method to “open” or ”shared” mode first.
4.5.5 Advanced
Choose “Wireless”Æ”Advanced”, you will see the screen of Wireless--Advanced settings shown
as below.
Figure 4-91
80
To Next Page
Loading...
