TD-W8960NB 300Mbps Wireless N ADSL2+ Modem Router User Guide
)
Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
7. On the next screen you will see the detailed settings you’ve made. Please click the
Apply/Save button to save these settings.
Figure 4-13
8. On the next screen you will see the WAN Port Information Table with the new configuration.
Figure 4-14
¾ Remove: Select the check box in the table above and then click Remove, the corresponding
interface will be deleted in the table.
23
To Next Page
Loading...
