34
The WPS Configuration Screen of Wireless Adapter
Note:
The default PIN code of the modem router can be found on its label or the WPS screen in
its web configuration page.
2) PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration
(PBC) method, you can add it to the network by PBC with the following two methods.
Select
PBC, you will see the following screen.
Method One: Hardware push button
Step 1: Press the WPS/RESET button on your modem router for about 2 seconds or click
the Start WPS button on the screen.
To Next Page
Loading...
