68
Appendix A: Configuring the PC
We’ll introduce how to install and configure the TCP/IP correctly on your computer. First make
sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary.
The default IP address of the modem router is 192.168.1.1. And the default Subnet Mask is
255.255.255.0. These values can be changed as you desire. Here we use all the default values
for description and take Windows XP as example.
1. Configure TCP/IP component
1) On the Windows taskbar, click
Start, and then click Control Panel.
2) Click the
Network and Internet Connections icon, and then click on the Network
Connections tab in the appearing window.
3) Right click the icon that showed below, then select
Properties on the prompt page.
4) In the prompt page that showed below, double click on the
Internet Protocol (TCP/IP).
To Next Page
Loading...
