2
Connect Your Modem
Before cable connection, cut off the power supply and keep your hands dry. You can follow the steps below
to install it.
1. Use ADSL Splitter, The splitter has three ports:
LINE: Connect to the wall jack
PHONE: Connect to the phone sets
MODEM: Connect to the ADSL port of your Modem
2. Plug one end of the telephone (RJ11) cable into your modem ADSL port and other end to the MODEM port of
the ADSL splitter
3. Connect one end of a network (RJ45) cable to your computer’s Ethernet port and the other end to the Ethernet
port on the modem.
4. Power on the computers and modem
5. Wait for 60 seconds until modem initialized
6. Open Web browser and enjoy internet surfing
7. To use wireless connection, from your wireless device, select the Network Name and enter the Wireless Key
(both are labelled at the bottom of you modem).
To Next Page
Loading...
