4. Port Name: In this option, type a name for identification purpose or just leave it in
default (recommended).
N
40EEED-1. You may also change the <ATALK_PS> to
a name you like for identification purpose in this option. The print server will append the last
ote: The default print server’s Chooser name is as shown as follows:
<ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the device’s
Node ID. For example: ATALK_PS-
six digits to the name you specify.
5. Printer Type: In this option, the LaserWriter of printer type by default
ASCII, TBCP and BCP.
Setting Up a Macintosh Computer
. The Chooser window then displays an Apple Zone list. Select the Zone name that you
ote: If you select a Zone that the PRINT SERVER doesn’t belong to, as you specified in the
(recommended).
6. Data Format: In this option, data format includes
1. At a Macintosh computer, from the Apple menu, select Chooser.
2
specified when configuring the PRINT SERVER.
N
previous section, no print server will be displayed in the Step 4.
3. You have to use a PostScript printer that you can select the LaserWriter 8 icon.
4. The Chooser window then displays PRINT SERVER (s) featuring the support for
AppleTalk protocol, along with its default Chooser Name in the right-hand Select A
Note: 1.Y nd Zone name of a PRINT SERVER by
PostScript Printer dialog box.
ou may change the default Chooser name a
using your web browser before proceeding with this installation. Please see the
previous section in this chapter for details.
2. If you use Mac OS 8.x or 9.x, please make sure your printer support PostScript.
5. Click Setup… button and choose the PPD file matching your printer, and click OK. If
your printer does not appear in the PPD file list, please contact your printer vendor. You
if you do not need any printer specific features.
Chooser Windows.
. Done.
may also use the Generic PPD
6. Close the
7
42
To Next Page
Loading...
