TCP/IP Protocol Installation
1. Click Start, point to Settings and select Control Panel.
2. Double click the Network icon.
. If the TCP/IP Protocol is not already installed, click Add. 3
. Select Protocol and click 4 Add.
from the Manufacturers list.
7. Sp d Gateway address or specific “Obtain IP
address automatically”, if a DHCP server is available on the LAN.
9. Done.
cess the print server requires well-configured TCP/IP
. Select Microsoft 5
6. Select TCP/IP Protocol from the Network Protocols list.
ecify an IP address, Subnet Mask, an
8. Restart the computer.
Note: Using TCP/IP protocol to ac
settings. If you are not familiar with these settings, please consult your network
administrator for details or ask for help.
IPX/SPX-compatible Protocol Installation
, and select Control Panel.
icon.
is not already installed, click Add.
and click Add.
. Select Microsoft from the Manufacturers list.
from the Network Protocols list and follow the
instructions on the screen.
1. Click Start, point to Settings
2. Double click the Network
. If the IPX/SPX-compatible Protocol3
. Select Protocol4
5
6. Select IPX/SPX-compatible Protocol
7. Restart the computer.
8. Done.
47
To Next Page
Loading...
