By default, the computer will first search for the print server(s) on the network by using
the IPX/SPX protocol.
If the IPX/SPX protocol is installed, the print server will be displayed along with its Node
ID, as shown in Node column. (The last 6 digits of the Node ID, located on the back of the
print server unit). Select one of the print server’s ports from the list.
.
Then please select TCP/IP or NetBEUI alternatively.
nt Port on Windows 95/98/Me/NT/2000/XP/2003
o provide users an easiest way to remove all of the Network Print Port components from
s with un-installation wizard
ase follow the directions listed below to
n procedure.
Click Start, point to Settings, and select Control Panel.
Double click the Add/Remove Programs icon.
. Click Add/Remove tab.
. Select Network Print Monitor for Windows 95/98/Me and click Add/Remove button.
cedure.
Note: We recommend you restart your computer after un-installation is finished.
If the IPX/SPX protocol is not installed, no print server will be shown in the display box
It starts again to search for the print server on the network by using the protocol you
specify in the step above. When finished, the print server will be displayed along with the
its Node ID, as shown in the following picture. (The last 6 digits of the Node ID, located on
the back of the print server unit). Select one of the print server’s ports from the list.
Uninstalling Network Pri
T
Windows 95/98/Me, the Network Print Port software come
program to help users remove the software components from their Windows
95/98/Me/NT/2000/XP/2003 systems in minutes. Ple
proceed with the un-installatio
After the Network Print Port is removed, the print server is no longer accessible via the
tw int Port on your system in order toNe ork Print Port. You have to re-install the Network Pr
access the print server again.
Procedure:
1.
2.
3
4
5. The un-installation wizard program will be launched.
6. Follow the directions on the screen to complete the un-installation pro
50
To Next Page
Loading...
