NetBEUI Protocol Installation
tBEUI is not already installed, click Add.
le
5. S anufacturers list.
. Select NetBEUI from the Network Protocols box and follow the instructions on the
screen.
8. Done.
ote: For more detailed information, please refer to your Microsoft Windows
1. Click Start, point to Settings, and select Control Panel.
2. Double click the Network icon.
3. If the Ne
4. Se ct Protocol and click Add.
elect Microsoft from the M
6
7. Restart your computer for new settings to take effect.
N
9X/ME/NT/2000 manuals.
Windows 95/98/Me/NT/2000/XP/2003 manual Installation Procedure
nsure a smooth installation:
up CD.
Click Next.
complete. You may add the Network Print Port by using
ick OK.
rinters.
nufacturer and printer type and click Next.
Please perform the steps as follows to e
. Run Setup from the print server’s Set1
. The Network Print Monitor for Windows 95/98/Me Setup will then appear. 2
3. A message reading, “Setup is
the PSAdmin” will appear. Cl
. Click Start, point to Settings, and select P4
5. Double-click the Add Printer icon.
6. Select Local Printer and click Next.
7. Select the appropriate printer ma
8. Select LPT1 and click Next.
9. Type in the Printer Name and click Next.
48
To Next Page
Loading...
