TP-Link TL-PS110P - 7. TCPIP LPR Port Printing Installation; Assigning an IP Address

system.sysLocation Indicates the location of the print server.
snmp.snmpEnableAuthen
Enables or disables the function of sending SNMP Authentication
Failure trap message to the network administrator, if the
t correct.
Traps
community name within a SNMP request is no
Users can set up print server’s SNMP functions by using their browsers.
1. Click Setup, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
lt
ess
right in
NMP Traps: Enable the function of sending SNMP Authentication Failure trap message to
the network administrator, if the community name within a SNMP request is
SNMP Community: The print server supports up to two community names. The defau
community name is public (case-sensitive), with Read Only acc
default.
Support HP WebJetAdmin: This option allows user determine to disable/enable the
Support HP WebJetAdmin.
S
not correct.
44