TP-Link TL-R470T User Manual

Name: TP-Link TL-R470T
Brand: TP-Link
Rating: 4 (1 reviews)

118 pages

To Next Page

To Previous Page

-10-

Step 4: Configure the IP address as shown in Figure 3-4. After that, click OK.

Figure 3-4

Note:

You can configure the PC to get an IP address automatically, select “Obtain an IP address

automatically” and “Obtain DNS server address automatically” in the screen above. For Windows

98 OS or earlier, the PC and router may need to be restarted.

Now, you can run the Ping command in the command prompt to verify the network connection. Please

click the Start menu on your desktop, select run tab, type cmd in the field, and then type ping

192.168.0.1 on the next screen, and then press Enter.

If the result displayed is similar to the screen below, the connection between your PC and the Router

has been established.

Figure 3-5

If the result displayed is similar to the screen shown below, it means that your PC has not connected to

the Router.

Other manuals for TP-Link TL-R470T

Need help?

Do you have a question about the TP-Link TL-R470T and is the answer not in the manual?

General