EasyManuals Logo

TP-Link TL-R470T User Manual

TP-Link TL-R470T
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
-52-
Figure 4-23 NAT Setup
The following items are displayed on this screen:
¾ NAPT
Source Port Range:
Enter the source port range between 2049 and 65000, the span of which
must be not less than 100.
¾ NAT-DMZ
NAT-DMZ:
Enable or disable NAT-DMZ. NAT DMZ is a special service of NAT
application, which can be considered as a default forwarding rule. When
NAT DMZ (Pseudo DMZ) is enabled, all the data initiated by external
network falling short of the current connections or forwarding rules will be
forwarded to the preset NAT DMZ host.
Host IP Address:
Enter the IP address of the host specified as NAT DMZ server.
4.5.1.2 Virtual Server
Virtual server can be used for setting up public services in your private network, such as DNS, Email
and FTP. Virtual server can define a service port. All the service requests to this port will be transmitted
to the LAN server appointed by the Router via IP address.
Choose the menu AdvancedNATVirtual Server to load the following page.

Other manuals for TP-Link TL-R470T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-R470T and is the answer not in the manual?

TP-Link TL-R470T Specifications

General IconGeneral
ProtocolsTCP/IP, PPPoE, DHCP, ICMP, NAT
DHCPDHCP Server, DHCP Client
Firewall SecurityIP and MAC Address Binding
Ports5 x RJ45 ports
VPN SupportPPTP VPN, L2TP VPN, IPSec VPN
ManagementWeb-based GUI
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Operating Humidity10% to 90% non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals