TP-Link TL-R470T User Manual

-37-
network is connected well. Consult your ISP if this problem
remains.
IP Address:
Displays the IP address assigned by your ISP.
Subnet Mask:
Displays the Subnet Mask assigned by your ISP.
Default Gateway:
Displays the IP address of the default gateway assigned by your
ISP.
Note:
To ensure the BigPond connection re-established normally, please restart the connection at least 5
seconds after the connection is off.
4.3.2 LAN
4.3.2.1 LAN
On this page, you can configure the parameters for LAN port of this router.
Choose the menu Network→LAN→LAN to load the following page.
Figure 4-9 LAN
The following items are displayed on this screen:
¾ LAN
IP Address:
Enter the LAN IP address of the Router. 192.168.0.1 is
the default IP address. The Hosts in LAN can access
the Router via this IP address. It can be changed
according to your network.
Subnet Mask:
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.

TP-Link TL-R470T Specifications

General

Protocols	TCP/IP, PPPoE, DHCP, ICMP, NAT
DHCP	DHCP Server, DHCP Client
Firewall Security	IP and MAC Address Binding
Ports	5 x RJ45 ports
VPN Support	PPTP VPN, L2TP VPN, IPSec VPN
Management	Web-based GUI
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing