TP-Link TL-R470T User Manual

-64-
On this page, you can configure the Link Backup function based on actual need to reduce the traffic
burden of WAN port and improve the network efficiency.
Choose the menu Advanced→Load Balance→Link Backup to load the following page.
Figure 4-33 Link Backup
The following items are displayed on this screen:
¾ General
WAN Ports:
Displays all the WAN ports in use. You can drag the light-blue WAN button to
primary and backup WAN list. The color of WAN button changing to gray
indicates that the WAN port is already in the primary and backup WAN list.
WAN Config:
The WAN port in the secondary WAN list will share the traffic for the WAN in
the primary WAN list under the specified condition. The primary WAN list can
contain one or more WAN ports, while the backup WAN list contains only one
WAN port.
Mode:
You can select Timing or Failover.

TP-Link TL-R470T Specifications

General

Protocols	TCP/IP, PPPoE, DHCP, ICMP, NAT
DHCP	DHCP Server, DHCP Client
Firewall Security	IP and MAC Address Binding
Ports	5 x RJ45 ports
VPN Support	PPTP VPN, L2TP VPN, IPSec VPN
Management	Web-based GUI
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing