8
below.
Figure 3-5
)
Note:
The default User name “admin” and Password “admin” are set at the factory for the administrator.
You can change them in the Account Menu (Please check “SETTING → BASIC → Security →
Account”).
3. The web-based management page will display on your screen. On the leftmost column of the
web-based management page are Setting, Client Setting, and Image Setup. For more
details, you can refer to Section 5.2 Setting
, Section 5.3 Client Setting and Section 5.4
Image Setup
.
Figure 3-6
To Next Page
Loading...
